ADTRAN 1204006L1 Manuale Utente Scaricare il pdf (Pagina 94)

Chapter 7. DTE Port Configuration

7-18 Express 5210 User Manual 61200208L1-1

Physical Layer Options (PHYS LYR OPTS)

Interface Type (INTERFACE)

Select the connector type for the

DTE interface. The choices are

V.35

and

EIA-232

Bit Rate

Select the operating speed of the DTE interface to match the

connected device.

Data Bits

Select the byte length to match the connected asynchronous device.

The choices are

and

Parity

Select even, odd, or no parity information. Set to match the

connected asynchronous device.

Stop Bits

Select one or two stop bits. Set to match the connected

asynchronous device.

Hardware Flow Control

When set to

the Express 5210 disables CTS, temporarily

stopping the data being transmitted from the DTE device to the

Express 5210.

The bit rate selections vary depending on the speed selections made for the

Network

port. Also, for rates higher than 56/64 kbps, the External DCE

card is required.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 202 203

Nessun commento

ADTRAN 1204006L1 Manuale Utente Pagina 94