ADTRAN NetVanta 3205 Guida di Installazione Scaricare il pdf (Pagina 23)

NetVanta 3000 Series Routers Hardware Installation Guide

NetVanta T1/FT1 NIM (P/N 1200862L1)

The T1/FT1 NIM (shown in Figure 9) provides a T1 WAN interface for the NetVanta 3000 Series Routers.

This provides a full T1 or fractional T1 network interface. Refer to Table F on page 49 for the WAN-T1

connector pinout, and Table L on page 51 for the DBU connector pinout. An optional DIM is required for

dial backup applications.

Figure 9. NetVanta T1/FT1 NIM

Features and Specifications

Operating Modes

• T1/FT1 Frame Relay

• T1/FT1 PPP

T1/FT1 Interface

• Line Rate: 1.544 Mbps +/- 75 bps

• Line Code: AMI or B8ZS

• Framing: D4 (SF) or ESF

• FT1 Line Rate: DS0 Channelized (multiples of 56/64 kbps)

• Input Signal: 0 to -36 dB (DS-1)

• Line Build-Out: 0, 7.5, 15, 22.5 dB

• Connector: RJ-48C

• DS0 Assignment: Programmable

Clock Source

•Network

•Internal

Diagnostics

• Test pattern generation and detection: QRSS and 511

• Network loopbacks (local and remote); responds to both INBAND and FDL loop codes

• Alarm generation and detection

• Network and user sets of performance data (15 minute and 24 hour)

Relevant Requirements/Standards

•EMC - see Electromagnetic Compatibility (EMC) Table on page 5.

• ACTA/FCC Part 68

• Industry Canada CS03

• UL and CUL

• T1 Interface: Pub 62411

• ESF Format Interface: TR. 194

• ESF Performance Monitoring: TR. 54016 and T1.403

WAN-T1 DBU

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Nessun commento

ADTRAN NetVanta 3205 Guida di Installazione Pagina 23